Fix PS4 error code SU-30746-0

PS4 error code SU-30746-0: Fix this Error Now

Posted by

As the traffic and the demand for PS4 are increasing, many users have reported the problem of the occurrence of errors in PS4. There has a contention that the error codes in PS4 are also increasing which needs a real quick fix. 

In this article, we are going to deal with a PS4 error code. The PS4 error code SU-30746-0 is the said error that we are going to talk about in this solution guide. We will tell you all about the error code and the causes of it. Along with that, a detailed solution guide will also be provided.

It is important to know what is this error code about before providing any rectification measures. So let’s go to the next segment and discuss the problem.

What is the PS4 error code SU-30746-0?

PS4 error code SU-30746-0

This error is a total failure of the system. This sentence is very subjective which technically means that the PS4 error code SU-30746-0 is a term which is the system’s inability to locate where is the proper update file which needs quick updation to update the console.

In simple terms, the PS4 error code SU-30746-0 means that the system is not being able to update to its latest version and the software update is still pending. The reason behind the occurrence of this error code is the system on your console cannot find the correct update file. 

Let us see what are the reasons behind the occurrence of this particular error code and how to solve them.

Also Read:

PS4 error NP-36006-5

Fix PS4 flickering screen

What causes the PS4 error code SU-30746-0 to occur?

There are a few of the basic causes which act as the major reason behind the occurrence of the PS4 error code SU-30746-0. The causes have been stated and mentioned below:

  • This error occurs when your firmware update which the console is trying to install is not supported by Sony anymore.
  • There is a system glitch during the firmware update can be another cause of the said issue.
  • A very common and petty cause for the occurrence of any error code is the loss of internet connectivity.

Therefore, these can be stated as the causes or the reasons for the occurrence of this particular error code. Now it’s time to know how can we overcome the problem of the PS4 error code SU-30746-0.

How can we fix the PS4 error code SU-30746-0?

PS4 error code SU-30746-0 fix

There are some of the major troubleshooting steps that have been successfully tried by the users to solve the problem of the PS4 error code SU-30746-0. 

In this segment, all those rectification measures have been listed which are as follows:

Update your software

This is is the first and foremost step to fix a particular error code because this error code occurs when there is a problem in the update process of the system. So it is better to make sure that firstly, you successfully update your system software. 

You can just update your system software in your console just by connecting it to good internet. Just simply go to the settings option on your device and click on ‘system software update’.

Start PS4 in safe mode

You should start your PS4 in safe mode and reboot it to get rid of this particular error. You may do so by following these steps:

  • Turn off your PS4 and hold on to the power button till it clicks two beeps.
  • The safe mode menu bar will now appear on your screen when you release the power button after two beeps.
  • Now, connect your PS4 controller with the USB cable.

Pair your controller by clicking on the PS button and choosing ‘restart PS4’.

In this way, you will be able to restart your console in safe mode.

Reset your PS4

Even after following the solution steps, the problem persists, then you may factory reset your PS4 and start using it fresh. You may factory reset your PS4 by following the below-mentioned steps:

  • Click on ‘settings’ and choose ‘initialization’.
  • Now go through all the instructions and it will lead you to the factory reset option. 
  • Click and go ahead with the factory reset of your console.

In this way, you will be successfully able to factory reset your PS4 to get rid of the PS4 error code SU-30746-0.

Initialize PS4

You can initialize your PS4 for gaming console by following the below-mentioned steps which will lead you to solve the problem:

  • Press and hold the power button of your console till you hear two beeps.
  • After two beeps, release the power button and Connect your Ps4 DualShock controller via a USB cable.
  • Press the PS button to pair it and scroll down to option 7. Initialize PS4 (Reinstall System Software).
  • Confirm the action by clicking on the X button.

This was the most simple way to initialize your console via safe mode.

Repair PS4 software files

It can also be a solution to solve the problem of the PS4 error code SU-30746-0. This problem will arise if your system files are corrupted or if it has some malicious intentions to it. You may just delete the corrupted files and reboot your system to solve this problem in a very easier way.

Therefore these are all the probable solutions that have proven to be useful in getting rid of this particular error code by many users.

Final Words

In final words, it can be said that this is a very common error in the PS4 and it can also be resolved without many complexities. I hope this article has given you the solution to your problem and you can now enjoy your favorite games on your PS4.

Frequently asked questions

Why does the PS4 gets frozen on system software updates?

Due to the problem of the console overheating, the PS4 software update can get frozen in the middle of the process of getting updated.

Why does the PS4 get stuck in safe mode sometimes?

If there is any system issue with the software of the console then, it may get stuck in the safe mode.

My name is Jessika, love to dig knowledge about, Gadgets, Games, and Technologies. I live in USA and love to write content, and when I am not doing research on game errors or not having a keyboard, mouse in my hand, you can find me watching movies.